Cylinders

Telford.png
Tempest_Heat_Pump_Final.png

Tempest Heat Pump hot water storage cylinders are designed for use with an air or ground source heat pump as the main heat source. They feature a purpose-designed coil with a 3.3m² surface area to allow maximum heat transfer of renewable energy into the stored water. Manufactured from Duplex stainless-steel, the cylinders are supplied with a factory-fitted 3 kW immersion heater to provide back-up heat.

Telford Standard Cylinder Features & Benefits

  • Duplex stainless steel provides superior corrosion resistance

  • 316L grade stainless-steel 22mm compression fittings and coils

  • Supplies mains pressure hot water and high flow rates

  • Fast reheat

  • Factory-fitted temperature and pressure relief value set at 7 bar / 90°C

  • Remote expansion vessel with factory-fitted wall mounting bracket

  • Full unvented kit supplied

  • Highly efficient

  • Fully insulated to minimise any heat loss

  • Factory-fitted 3kW immersion heater (250–500 litre cylinders supplied with additional off-peak immersion heater)

  • Twin coil option available for use with a traditional boiler and solar thermal

  • Available in 200–500 litre capacities

  • Lifetime manufacturing warranty on inner container (2 years on components)*

  • Renewable and bespoke options available

 

Telford Pre-Plumb Cylinder Features & Benefits

  • Remote expansion vessel with factory-fitted wall mounting bracket

  • Full unvented kit supplied

  • Pre-plumbed with pre-fabricated pipework and wiring saves installation time

  • Duplex stainless steel provides superior corrosion resistance

  • White steel cased finish (other colours available on request)

  • 316L grade stainless-steel 22mm compression fittings and coils

  • Supplies mains pressure hot water and high flow rates

  • Fast reheat

  • Factory-fitted temperature and pressure relief value set at 7 bar / 90°C

  • Up to 3 bar max pressure

  • Highly efficient

  • Fully insulated to minimise any heat loss

  • Factory-fitted 3kW immersion heater(s)

  • Integrated 50 litre buffer store

  • Cylinders available in 170-300 litre capacities

  • Lifetime manufacturing warranty on inner container (2 years on components)*

Tempest_Pre_Plumbed_Final.png
WH.jpg

Manufactured from high quality stainless steel or premium quality copper, the Climacyl Heat Pump cylinder range is designed to provide maximum efficiency for heat pump cylinder applications.

As with all renewable technologies, Heat Pump cylinder design demands careful design consideration. Climacyl Heat Pump Cylinders are designed to ensure the correct surface area and flow rate through the coil- both considerations are key to efficient system operation.

A wealth of experience in both specialist cylinder manufacturing and renewable technologies system design ensures that we can provide the most efficient cylinder to meet your heat pump system requirements.

WH Cylinders.jpg
Mixergy.png

Mixergy have developed a highly efficient heat pump cylinder which utilises a plate heat exchanger for optimal heat transfer.

If you upgrade to a Mixergy heat pump ready cylinder, these are some of the benefits:

  • Future-proof cylinder with a 25 year life-span 

  • Smallest heat pump cylinder on the market

  • Significant improvement on hot water output

  • Smart, cloud-connected and app-controlled

  • Heats entire cylinder content to an even temperature and controls temperature accurately

  • ‘Smart Tariff’ ready

  • Compatible with all heat-pump types – for more information contact us

  • Works with a wide range of ASHP and GSHP’s including: Vaillant, Daikin, Mitsibishi, Panasonic, LG, Hitachi, Kensa and more…

LOW TEMP HEAT PUMP TANK

Variable temperature capacity of 45-60°C whilst heating full contents

 

  • Compatible with ≤60C constant primary circuit heat pumps

  • The external plate heat exchanger assembly delivers 10-20% more usable hot water than a similar sized conventional cylinder

  • More efficient heat transfer with high surface area plate exchanger minimising heat pump delivery and return temperatures

  • Smart scheduling and controls with the Mixergy app

  • Utilises our resistor switch to call for heat from heat-pump without need for a cylinder stat pocket.

HeatPump-reg-immersion-full.png
Mixergy-heat-pump_2_4x.png