Galu Classic No coil

Classic range of Accumulator tanks 

UK mainland delivery from £12.95

Delivery information: 3 -4 weeks from order

pdfDownload Installation manual

pdfDownload Brochure

in stock In stock

Choose Size:
from £1077.00 ex VAT

The GALÚ Classic Accumulator Tank, facilitates the distribution of energy to a heating system and can provide domestic hot water. With biomass the best efficiency is acquired by heating at high temperatures to get all components of the wood burnt. The GALÚ accumulator tank enables biomass boilers to reach their highest levels of efficiency.

The GALÚ tank can be supplied with coils or blank hatches. Enabling the retrofit of domestic hot water or solar coils for example at a later date.

Each GALÚ tank is wrapped in a layer of polyurethane insulation in excess of 100mm thick. This guarantees maximum retention of the energy produced from all heat sources. Energy can be stored for days, even weeks with minimum heat loss.

Warranty Information

Terms and Conditions of Warranty


All GALÚ tanks come with a guarantee as outlined below:

The body of the tank including the polyurethane insulation layer is guaranteed against defective material for a period of 5 years.

All other components are guaranteed for 2 years.

Guarantees begin from the date of purchase. The following conditions apply:

The Buyer must examine the tank(s) upon receipt. Any defects or failures to correspond with that which was purchased must be reported to GALÚ within 7 days of delivery.

The tank must be installed and commissioned by a qualified and competent installer, in accordance with current building regulations and is maintained and serviced according to our recommendations. The installer must follow the installation instructions provided.

A service record must be kept and made available for inspection if required.

The tank must not be modified in any way or used for any purpose other than that for which it was designed.

The water passing through the tank must be potable water (chloride levels <200mg/h)

The warranty does not cover the effects of scale.

The warranty covers any malfunctions which occur within period of warranty resulting from a manufacturing defect. In such cases defective items would be replaced.

The warranty provided does not cover damage, malfunction or service failures caused by:

Failure to follow GALÚ’s installation, operation or maintenance guidelines.The installation, repair, modification or movement of the product by someone other than a professional plumber.Wilful or accidental damage.Inadequate quality/quantity inhibitor in the heating systemAbuse or misuse or neglect of product.Damage to product caused by pests, fire, flooding, lightning, power surges accidental damage, or any other cause that is outside the reasonable control of GALÚ and not arising from the normal operation of the product.

Where it is deemed that the product is defective, GALÚ shall be entitled to repair or replace the tank free of charge, or at the Company’s discretion, refund the goods, without further liability to the Buyer. Labour costs up to a maximum value of €750 may be paid by the manufacturer, within the first 12 months of the warranty, where the tank is deemed to be defective under the terms outlined above. Beyond the first 12 months, GALÚ’s maximum liability is limited to the purchase price of the product.

GALÚ is not responsible for lost services, cost of substitute services, lost profits, associated with replacement of the tank, expenses arising from third party claims or any other consequential or punitive damages arising from the loss of use or failure of the warranted product to perform.

The buyer and the company agree that in the event of a dispute, all meetings and/or court appearances will take place within the Irish jurisdiction.

To validate this warranty the application form provided must be completed and returned to GALÚ within 30 days from the date of purchase.

Domestic hot water coils

Galu use finned copper coils for the production of domestic hot water . Finned copper dramatically increases the surface area of the coil giving better heat transfer capabilities. Galu have performed many laboratory tests to optimise coil thickness, fin height, fin spacing as well as inner wall surface structure.

Using coils inside the accumulator to produce domestic hot water means an additional separate hot water tank is not required. The size (diameter and length) of the coils will depend on the hot water requirement within the building along with the temperature at which the tank will be stored . Depending on the accumulator model the coils can be placed either horizontally or vertically. In the Classic models the coils are installed through hatches in the tank enabling them to be removable. This also allows upgrading/retrofitting of coils.

GALÚ Classic Standard Ports and features.

Eight 1 ¼" B.S.P. Heat Generation, Heat Distribution Ports.

One 2" B.S.P. Electric Resistor Port.

One 1" B.S.P. Drain Port.

One 1" B.S.P. Air Vent Port.

Four ¾" B.S.P. Thermostat Port.

Two flanged ports for the placement of finned copper Hot Water Coils.

100mm seamless polyurethane foam insulation.


Galu Classic No coil
Galu Classic No coilPlant room

Click on image to enlarge



« Back to Products

People who bought this also bought...

Compression ElbowsCompression Elbows
Compression Elbows
from £1.59 ex VAT
no image available
Compression Couplers
from £1.59 ex VAT
Flexi Foot
Flexi Foot
from £12.57 ex VAT